Ang Nichrome 80 Strip gigamit alang sa mga elemento sa pagpainit sa kuryente sa mga gamit sa balay ug mga hudno sa industriya. Ang kasagarang aplikasyon mao ang mga flat iron, ironing machine, water heater, plastic molding dies, soldering irons, metal sheathed tubular elements ug cartridge elements.
Grado | Ni80Cr20 | Ni70Cr30 | Ni60Cr23 | Ni60Cr15 | Ni35Cr20 | Karma | Evanohm | |
Nominal nga komposisyon% | Ni | Si Bal | Si Bal | 58.0-63.0 | 55.0-61.0 | 34.0-37.0 | Si Bal | Si Bal |
Cr | 20.0-23.0 | 28.0-31.0 | 21.0-25.0 | 15.0-18.0 | 18.0-21.0 | 19.0-21.5 | 19.0-21.5 | |
Fe | ≦1.0 | ≦1.0 | Si Bal | Si Bal | Si Bal | 2.0-3.0 | – | |
Al1.0-1.7 Ti 0.3-0.5 | Al2.7-3.2 Mn0.5-1.5 | Al2.7-3.2 Cu2.0-3.0 Mn0.5-1.5 | ||||||
Max operating temp(°C) | 1200 | 1250 | 1150 | 1150 | 1100 | 300 | 400 | |
Resisivity(Ω/cmf,20 ℃) | 1.09 | 1.18 | 1.21 | 1.11 | 1.04 | 1.33 | 1.33 | |
Resisivity(uΩ/m,60°F) | 655 | 704 | 727 | 668 | 626 | 800 | 800 | |
Densidad (g/cm³) | 8.4 | 8.1 | 8.4 | 8.2 | 7.9 | 8.1 | 8.1 | |
Thermal Conductivity(KJ/m·h·℃) | 60.3 | 45.2 | 45.2 | 45.2 | 43.8 | 46.0 | 46.0 | |
Linear Expansion Coefficient(×10¯6/ ℃)20-1000 ℃) | 18.0 | 17.0 | 17.0 | 17.0 | 19.0 | - | - | |
Punto sa Pagkatunaw (℃) | 1400 | 1380 | 1370 | 1390 | 1390 | 1400 | 1400 | |
Katig-a (Hv) | 180 | 185 | 185 | 180 | 180 | 180 | 180 | |
Tensile Kusog (N/mm2 ) | 750 | 875 | 800 | 750 | 750 | 780 | 780 | |
Elongation(%) | ≥20 | ≥20 | ≥20 | ≥20 | ≥20 | 10-20 | 10-20 | |
Micrographic nga Istruktura | austenite | austenite | austenite | austenite | austenite | austenite | austenite | |
MagneticProperty | Dili | Dili | Dili | Medyo | Dili | Dili | Dili | |
Kusog nga Kinabuhi(h/℃) | ≥81/1200 | ≥50/1250 | ≥81/1200 | ≥81/1200 | ≥81/1200 | - | - |
150 0000 2421